0086 19937104978
Author:Kangdi 09-03-2021
Hello, everybody! Good day! Welcome to Kangdi! Steam eye mask processing, also known as steam hot compress eye patch OEM. Kangdi Medical Equipment, hot compress eye mask OEM manufacturer, adopts advanced spontaneous heat temperature control technology, so that the moisture in the air and metal powder in the eye mask inside the heating body, generating a subtle warm water vapor that can not be seen by the naked eye. (So the eye mask has steam.) It's a generic name for a class of products developed in response to a market demand for eye care. It gets its name from its ability to spontaneously heat and produce steam.
* Specifications: custom-made
* Patterns: manufacturers can do all kinds of patterns according to your requirements, to ensure the diversification of products
* Material composition of steam eye mask products: all choose medical grade
Spunlaced non-woven fabric + needled cotton + heating element (natural mineral physical heating) + silk high elastic ear hanging + essential oil.It took 100 days from packaging design, material selection and process to product design, material selection and process.
It took one month to test the elasticity of the earring, stretching -- retracting -- stretching -- retracting. More than 600 eye masks were tested, and more than 20,000 times of artificial stretching and lifting tests were conducted. Finally, the silk material with high elasticity was selected.
* Principle of action: principle of hot compress of traditional Chinese medicine
After the clinical test, 39.5 degrees is selected as the most suitable temperature for the skin around the eyes. The pores of the skin around the eyes are opened, and the moisture and essential oil will evaporate during the heating process of the heating body. Small moisture molecules and essential oil molecules will be absorbed by the skin to moisturize the skin.
The products of steam hot compress eye mask processing manufacturers are varied. A good steam eye mask should be a one-time heating body, heated evenly, so it is best to be a thin sheet type. The length of the heating time is about 60 minutes. If it is beyond this time range, the heating time is too long, which may lead to eye scald, while the heating time is too short, the effect is not obvious. So remind friends in need must choose the products of regular manufacturers. Steam eye patch OEM, Kangdi medical device eye patch processing factory most professional.